RRT PRODUCTS

LEG GUARDS
for INTEND FORK

---SIZES:
SHORT : 160 max fork travel or below
MID : 180 max fork travel or below
LONG : 210 max fork travel or below

---THE KITs:
-2x CNC alloy brackets with 3M high strength dual side tape AWB5952 applied, 8gr each
-2x CNC carbon guards : 26/28/31 gr each
-8x Titanium custom screws : 2 grams for 8pcs
-2x outer leg clear adhesive Nitto protection strips
-1x brake hose support (not available for DH)
-1x 3M AWB strip to re-position lower brake hose guide
-6x tire-ups necessary during the installation (you will remove after)

---WEIGHT:
short version: 60 grams ( considering 14 grams saving by removing intend brake hose support )

---BRAKE HOSE ROUTING:
short & mid : either , using “moto” style clamp on guard with provided ( removing intend arm), or with Intend original brake hose support.
long : only using the Intend original brake hose support.
note: braided hoses are not very advised with intend unless you encapsulate the hose into a clear rigid tube as seen in Motocross bikes.

---PRICE:
234 EUROs short&mid / 254 EUROs long + SHIPPING

I WANT A SET

HANDLEBAR CLAMP
HC-V3hd

limited EXCLUSIVE series

---TECH SPECS:
1.1/8" head-tubes
31.8 bar clamp diameter
60mm bar clamp width
15mm forward offset
147grams including all bolts
integrated top cap
GR5 titanium top cap M6 bolt
40mm tube clamp height
38 +/-1 mm head-tube length requirement
zero gap clamp technology
7075 high strength alloy
CNC 5 Axis extra fine machining
Titanium GR5 bolts
clear anodised : “raw-look” or gloss black
copper grease & micro spacers included
stiff A.F.

---CERTIFICATIONS: (Exceeds ISO standards for bicycle)
EFBE MTB GR / CAT 5
EFBE EPAC MTB GR / CAT 5 
EN 17406:2020 
ASTM F2043-13 DH / Ebike GR5

---PRICE:
274 EUROs + SHIPPING

I WANT THIS

WATCH THE CERTIFICATION / STRESS-TEST

HANDLEBAR CLAMP
HC-V1

limited EXCLUSIVE series

---TECH SPECS:
31.8 bar clamp
18mm offset
105grams including all bolts
64mm clamp area
zero gap clamps tecnhnology
7075 high strength alloy
CNC - 5 Axis fine machining
all Titanium GR5 bolts
clear anodised high raw-gloss finish
( availablein the rare special edition L.E. hard anodise H30 micron )
copper grease kit included
so moto

---CERTIFICATIONS: (Exceeds ISO standards for bicycle)
EFBE MTB GR / CAT 5
EFBE EPAC MTB GR / CAT 5 
EN 17406:2020 
ASTM F2043-13 DH / Ebike GR5

---PRICE:
224 EUROs + SHIPPING

I WANT THIS

WATCH THE CERTIFICATION / STRESS-TEST

ZEROBACK V2
FOR BANSHEE BIKES

(AKA : "THE MAGIC CARPET")

—BRIEF:
Specifically designed to work ONLY on banshee V3 or beyond frames ( titan rune prime etc)
Zero kickback when descending on high gears
100% anti-squat at sag when climbing on low gears
Free suspension movements no matter the gear use = CHAIN-LESS feeling.
no-drop chain CAGE
designed and tested in Finale Ligure
produced nearby
works on both long and short dropouts and on 27.5” and 29” wheelsizes

---TECH SPEC:
full 7075-T6 construction
12T special pulley hard anodised 50microns
Japan bearing (no china crap)
thick as F… construction
15 microns anodised body
ISCG-05 - max 32T front
chain length: 1 link longer than your actual setup
138 grams

—PRICE:
299 EUROS for 1 full working kit
Extra spare pulleys: 48 EUROs each (this includes also the bearing)
+ SHIPPING

—NOTES:
we do not support bashguards for enduro/trail/mtb. (DH only)

I WANT THIS

RRT MX-Kit PROTOTYPE
FOR BANSHEE LEGEND 29

—BRIEF:
Specifically designed to work ONLY on banshee LEGEND 29, latest version, XL and L.
Transform the bike from stock 29/29 into MULLET, preserving geometries.
Zero kickback when descending
Free suspension movements no matter the gear use = CHAIN-LESS feeling.
dual chain NO DROP guides
integrated replaceable BASH fin, made out of DELRIN.
designed and tested in Finale Ligure and Swiss DH bike parks
produced nearby
the kit is composed by RRT-MX leverage + ZEROBACK DH
the 2 parts of the kit must be always used together.

---TECH SPEC RRT-MX LEVERAGE:
full 7075-T6 construction
progression 16.9% (from 27.9%)
more linear ratio
more support
more overall feeling/control
less OFF-ON harsh feeling
less ramp up
= better DH race speed, more plush, more controlled
25lbs less spring required
works with your shock but custom shock tune is advised (since most stock suspension are way far from RRT damping values)

---TECH SPEC ZEROBACK DH:
full 7075-T6 construction
12T special pulley hard anodised 50microns
Japan bearing (no china crap)
thick as F… construction
15 microns anodised body
ISCG-05 works on LEGEND ONLY
max 34T front (depending on chainring teeth profile, no need of narrow wide tall teeth since the zeroback is equipped with dual retention chain pulleys)
chain length: 1 link longer than your actual setup

—PRICE:
CONTACT US